The scientific and research work
- Details
- Category: Activities
- Published: Monday, 25 November 2013 06:42
- Written by Super User
- Hits: 5644
Characteristics of the main directions of scientific and research work:
Scientific and research work carried out by the Chair as part of its research, statutory activity, grants and research work for the industry covers a wide spectrum of issues related to the broadly understood civil engineering industry. First of all, these are issues in the field of structural materials and products, especially in the field of concrete and other cement materials. Besides, the team's competencies also include technological issues, designing properties and durability of materials and its conditions. The subject of technology, properties and broadly understood durability of mineral materials are particularly developed, including mainly such materials as concrete and cement mortars, geopolymer concretes and mortars, soil- cement, structural ceramics.
The research topics undertaken by the Chair's employees in recent years include extensive research on the possibility of utilization of sewage sludge, which, after thermal processing, is a valuable addition to cement concretes.
In the field of cement composites, tests are carried out on: ordinary concretes and new generation concretes (high-performance and ultra-high-performance, self-compacting, lightweight aggregate concrete, fibre-reinforced concrete, self-healing concretes). These tests concern both technological aspects (composition design, evaluation of technical properties, etc.) and durability in various operating conditions - from cyclic freezing and thawing to high-temperature impact studies. Also, the team is investigating the effects of corrosion of mineral materials caused by biological agents.
The team conducts numerous research works on geopolymer composites. The problems related to the influence of their composition (selection and evaluation of the impact of the use of various aggregates, precursors and alkaline activators) on the properties of the mixture as well as the usable properties and durability of the hardened material are analyzed. Work is ongoing to use the special resistance of these binders to high temperature and to determine their resistance to chloride.
When characterizing the research activity of the Chair's team, it should be emphasized that in all research conducted at the Chair, great emphasis is placed on the aspects of sustainable civil engineering.
The Chair's scientific and research activity is financed both from internal funds and, to an increasing extent, from external funds as a result of European and national competitions (ERA-NET, NCN, NAWA, NCBiR, etc.). Scientific and research work is carried out in international cooperation with scientific research centres and universities. Scientific and research activities constitute a strong basis for extensive didactic activity, primarily in the field of subjects important in the education of a civil engineer, related to the broadly understood structural materials science.
Major research projects carried out at the Chair of Building Materials Engineering:
ERA-NET Cofund ERA-MIN 2: Smart Geopolymers (SMART-G) (2020-2022), the project implemented in cooperation with the Chair of Building Materials Engineering and the Faculty of Materials Engineering and Physics, CUT in an international consortium: Vrije Universiteit Brussel, Belgia, University of Aveiro, Portugalia; IESL/FORTH Institute of Electronic Structure and Laser, Heraklion, Grecja; ResourceFull, Leuven, Belgia; MNLT Innovations GP, Research and Development, Athens, Grecja; Przedsiębiorstwo Budowlano-Produkcyjne, Łęgprzem Sp. z o.o, Kraków, Poland; Mytilineos S.A. Athens, Grecja – project manager Izabela Hager, CUT Professor
NAWA: PPI/APM/2018/1/00027 International Academic Partnerships EMMAT E-mobility and sustainable materials and technologies (2018-2021) - project manager Izabela Hager, CUT Professor. More information on the project’s website: www.emmat.edu.pl
NCBiR: POIR.01.01.01-00-1132/18, POIR poddz. 1.1.1 Industrial research and development work carried out by the companies "Fast Track". The technology of economic diaphragm walls for the implementation of foundations, excavation lining and retaining walls (2019-2022), R&D service, project manager Tomasz Tracz, CUT Professor. More information on the project’s website: www.sciana-ess.pl
NCBiR: POIR.04.01.02-00-0032/17, POIR poddz. 4.1.2 Regional scientific and research agendas: Innovative technologies of waste recovery and processing as well as the revitalization of polluted areas in the municipal circular economy system (2018-2020), project manager CUT: Tomasz Zdeb, PhD. More information on the project’s website: www.intowgc.pl
NCBiR: POIR.04.01.04-00-0057/15-00, Technology of fibre reinforced soil-cement walls for implementation as the construction of excavation support structures, Research project financed under the Intelligent Development operational program, Measure 4.1 "Scientific research and development", Sub-measure 4.1.4 "Application projects" (2016-2018), project manager Tomasz Tracz, CUT Professor. More information on the project’s website: www.fibrogruntobeton.pl
NCBiR: POIR.04.01.02-00-0001/17 Innovative hybrid construction of vibro-isolating partitions to protect the environment against transport vibrations and from similar sources, participation in implementation, material development and material research - Maciej Gruszczyński, PhD
NCN: PRELUDIUM 12, 2016/23/N/ST8/01155, Influence of restraint of thermal strains on the characteristic of concrete spalling in fire (2017-2020), project manager - Katarzyna Mróz, PhD
NCN: N N506 045040, Multiparameter diagnosis of cement concretes exposed to fire temperatures (2011–2014), project manager Izabela Hager, CUT Professor
NCN: N N506 072138, Influence of composition and volume shares of cement paste and mortar in ordinary and high-grade mortars on their permeability determined at gas flow (2010-2013), project manager Professor Jacek Śliwiński
The Chair's employees are also involved in the implementation of educational projects:
NAWA: PROM POWR.03.03.00-00-PN13/18 - International scholarship exchange of doctoral students and academic staff (2018-2019)
NCBiR: POWR.03.05.00-IP.08-00-REG/18 „REG Region Uczący się” Program Operacyjny Wiedza Edukacja Rozwój
NCBiR: POWR.03.01.00-00-T071/18 „ Laboratory of a little engineer” Program Operacyjny Wiedza Edukacja Rozwój (2014-2020) - organization of classes for 5-6 year old children
In total, in 2017-2020, the employees of the Chair submitted over 30 applications, including 7 related to Horizon 2020. All employees of the Chair actively participate in the implementation of research or teaching projects.
The most important scientific and research achievements in the last 10 years
Chair’s employees are invited to participate in expert works. They are members of numerous international and national technical committees and associations, including:
RILEM TC 227-HPB: Physical properties and behaviour of High-Performance Concrete at high temperature; RILEM TC 256-SPF: Spalling of concrete due to fire: testing and modelling; RILEM TC 290-IMC: Durability of Inorganic Matrix Composites used for Strengthening of Masonry Constructions; RILEM TC 283-CAM: Chloride transport in alkali-activated materials.
The Chair’s employees are the members of The Committee on Civil Engineering of the Polish Academy of Sciences (CCE PAS); Polish Committee for Standardization (PKN); Building Materials Engineering Section CCE PAS; Lesser Poland Department of the Polish Association of Civil Engineers and Technicians PZiTB; Civin Engineering Commission of the Cracow Department of Polish Academy of Science; Construction Products Council RWB at the Polish Construction Products Department of GOBC; Advisory team of the Ministry of Science and Higher Education to evaluate applications and reports under the "Implementation PhD" program; Review Team for NAWA, Horizon 2020, NCBiR programme.
Also, they cooperate, inter alia, with the Polish Cement Association; The Association of Commercial Concrete Producers in Poland; with the Management of the "Pewny Cement" Label awarded by the Board of the Polish Cement Association.
In the last decade, there has been significant development of the research and development staff of the Chair. Four of the employees have obtained the degree of habilitated doctor, and there are currently 10 doctorates, including one cotutelle in cooperation with the University of Nantes.
Thanks to the funding of the project Academic International Partnerships NAWA EMMAT which is coordinated by the Chair, the cooperation of its employees with research centres and universities with a similar profile of scientific activity regarding modern construction materials that meet the requirements of sustainable development is developed. Currently, the Chair conducts joint research and employee exchange with the following research centres, including Nantes University, GeM Laboratory, Saint Nazaire, France; University of Beira Interior, Portugal; Czech Technical University in Prague, Czech Republic; Center Scientifique et Technique du Batiment, France; Universidad Católica del Uruguay, Uruguay; Dept. of Civil Engineering, National University, Taiwan; Pau et Pays d'Aldour University, France; School of Civil and Environmental Engineering, UNSW, Australia.
The participation of the Chair’s employees in the NAWA PROM project and the related international scholarship exchange of doctoral students and academic staff also ensured that young scientists would participate in summer schools, study visits, training courses and conferences. The direct effects of the international cooperation conducted are a significant increase in employee mobility, the organization of several international seminars and joint research on modern materials for sustainable civil engineering.
The result of the Chair's work and a significant achievement in the field of building materials engineering is the organization of a cyclical scientific and technical conference MATBUD, which in 2020 has its ninth edition. In 2016, conference papers were published in Procedia Engineering, Elsevier. During the last two editions (2018 and 2020), thanks to the large participation of foreign participants and the internationalization of the scientific committee, the conference has acquired an international character.
More information on the conference website: www.matbud.edu.pl.
An important effect of the activities of the Chair's employees are monographs, including scientific monographs developed together with foreign partners:
(1) Building materials engineering – New materials and test methods, ed. Izabela Hager, Publisher: Wydawnictwo PK, Cracow, 2020
(2) Korozja biologiczna kompozytów z matrycą mineralną, Elżbieta Stanaszek-Tomal, Publisher: Wydawnictwo PK, Cracow, 2020
(3) Scientific-Technical Conference: E-mobility, Sustainable Materials and Technologies, MATBUD’2020 – proceedings, eds. Tomasz Tracz, Katarzyna Mróz, Tomasz Zdeb, Publisher: EDP Sciences, Cracow, 19-20 October 2020 link
(4) 8th Scientific-Technical Conference on Material Problems in Civil Engineering, MATBUD’2018 - proceedings, eds. Izabela Hager, Tomasz Tracz, Publisher: EDP Sciences, Cracow, 25-27 June 2018 (indexed in Scopus and WoS) link
(5) Charakterystyka czynników determinujących trwałość murów ceglanych, Teresa Stryszewska, Publisher: Wydawnictwo PK, Cracow, 2017, ISBN 978-83-7242-955-1
(6) Energy Efficient Sustainable Building Materials and Products, ed. Izabela Hager, Publisher: Wydawnictwo PK, Cracow, 2017, ISBN 978-83-7242-966-7
(7) Konstrukcyjne lekkie betony kruszywowe, Lucyna Domagała, Publisher: Wydawnictwo PK, Cracow, 2014, ISSN 0860-097X
The staff of the Chair are authors or co-authors of numerous publications in reputable scientific, technical and industry magazines.
List of publications from the last 5 years 2016-2020:
2020
1. Selection of method of chemical analysis in measuring the salinity of mineral materials / Teresa Stryszewska, Marta Dudek // Materials [online]. – 2020, Vol. 13, Iss. 3, s. [1-13]. – doi: 10.3390/ma13030559. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
2. The effect of the type and amount of synthetic fibers on the effectiveness of dispersed reinforcement in soil-cements / Krystian Brasse, Tomasz Tracz, Tomasz Zdeb // Materials [online]. – 2020, Vol. 13, Iss. 18, s. [1-18]. – doi: 10.3390/ma13183917. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
3. Feasibility study of digital image correlation in determining strains in concrete exposed to fire / Katarzyna Mróz, Marcin Tekieli, Izabela Hager // Materials [online]. – 2020, Vol. 13, Iss. 11, s. 1-17. – doi: 10.3390/ma13112516. – ISSN 1996- 1944 Lista MNiSW: tak Punktacja MNiSW: 140
4. Rheology and mechanical properties of fly ash-based geopolymer mortars with ground granulated blast furnace slag addition / Mateusz Sitarz, Maciej Urban, Izabela Hager // Energies [online]. – 2020, Vol. 13, Iss. 10, s. [1-12]. – doi: 10.3390/en13102639. – ISSN 1996-1073 Lista MNiSW: tak Punktacja MNiSW: 140
5. Evolution of mechanical properties with time of fly-ash-based geopolymer mortars under the effect of granulated ground blast furnace slag addition / Mateusz Sitarz, Izabela Hager, Marta Choińska // Energies [online]. – 2020, Vol. 13, Iss. 5, Spec. Iss., s. [1-12]. – doi: 10.3390/en13051135. – ISSN 1996-1073 Lista MNiSW: tak Punktacja MNiSW: 140
6. Durability of structural lightweight concrete with sintered fly ash aggregate / Lucyna Domagała // Materials [online]. – 2020, Vol. 13, Iss. 20, Spec. Iss., s. [1-20]. – doi: 10.3390/ma13204565. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
7. Size effect in compressive strength tests of cored specimens of lightweight aggregate concrete / Lucyna Domagała // Materials [online]. – 2020, Vol. 13, Iss. 5, Spec. Iss., s. [1-16]. – doi: 10.3390/ma13051187. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
8. Impact of sample size and maximum aggregate grain on the representativeness of concrete samples / Jacek Śliwiński, Patrycja Duży // Energies [online]. – 2020, Vol.13, Iss. 13, s. [1-11]. – doi: 10.3390/en13133358. – ISSN 1996-1073 Lista MNiSW: tak Punktacja MNiSW: 140
9. Analysis of changes in the microstructure of geopolymer mortar after exposure to high temperatures / Marta Dudek, Mateusz Sitarz // Materials [online]. – 2020, Vol. 13, Iss. 19, s. [1-17]. – doi: 10.3390/ma13194263. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
10. Additional porosity as a side effect of polycarboxylate addition and its influence on concrete’s scaling resistance / Aneta Nowak-Michta // Materials [online]. – 2020, Vol. 13, Iss. 2, Spec. Iss., s. [1-13]. – doi: 10.3390/ma13020316. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
11. Behaviour of fly ash geopolymer at high temperature / Izabela Hager, Mateusz Sitarz, Katarzyna Mróz // IEEE Access [online]. – 2020, Article in press, s. [1-5]. – doi: 10.23919/SpliTech49282.2020.9243812. – ISSN 2169- 3536 Lista MNiSW: tak Punktacja MNiSW: 100
12. Addressing the need for standardization of test methods for self-healing concrete: an interlaboratory study on concrete with macrocapsules / Tim Van Mullem, Marta Dudek, Arkadiusz Kwiecień, Teresa Stryszewska // Science and Technology of Advanced Materials [online]. – 2020, Vol. 21, Iss. 1, s. 661-682. – doi: 10.1080/14686996.2020.1814117. – ISSN 1468-6996 Lista MNiSW: tak Punktacja MNiSW: 100
13. Durability of mortars modified with the addition of amorphous aluminum silicate and silica fume / Maciej Gruszczyński, Małgorzata Lenart // Theoretical and Applied Fracture Mechanics [online]. – 2020, Vol. 107, s. [1-8]. – doi: 10.1016/j.tafmec.2020.102526. – ISSN 0167-8442 Lista MNiSW: tak Punktacja MNiSW: 100
14. Influence of pore structure on humidity parameters of cement-polymer mortars contaminated with filamentous fungi / Elżbieta Stanaszek-Tomal // PLOS ONE [online]. – 2020, 15 (4), s. 1-12. – doi: 10.1371/journal.pone.0231347. – ISSN 1932-6203 Lista MNiSW: tak Punktacja MNiSW: 100
15. Bacterial concrete as a sustainable building material? / Elżbieta Stanaszek-Tomal // Sustainability [online]. – 2020, Vol. 12, Iss. 2, Spec. Iss., s. [1-13]. – doi: 10.3390/su12020696. – ISSN 2071-1050 Lista MNiSW: tak Punktacja MNiSW: 70
16. Analiza właściwości ochronnych gruntobetonów wobec stali zbrojeniowej = Analysis of protective properties of soilcements towards reinforcing steel / Tomasz Zdeb, Tomasz Tracz, Mateusz Żelazik // Cement Wapno Beton [online]. – 2020, Vol. 25, Iss. 1, s. 61-71. – doi: 10.32047/cwb.2020.25.1.7. – ISSN 1425-8129 Lista MNiSW: tak Punktacja MNiSW: 40
17. Influence of the activator nature on mechanical properties of fly ash-based geopolymer / Izabela Hager, Mateusz Sitarz // International Journal of Advanced Science and Technology [online]. – 2020, Vol. 29, No. 2, s. 631-637. – ISSN 2005- 4238 Lista MNiSW: tak Punktacja MNiSW: 20
18. Self-healing cement materials – microscopic techniques / Marta Dudek // Budownictwo i Architektura [online]. – 2020, Vol. 19. No 2, s. 33-40. – doi: 10.35784/bud-arch.1494. – ISSN 2544-3275 Lista MNiSW: tak Punktacja MNiSW: 20
19. Trwałość betonu w ujęciu aktualnych norm PN-EN 206+A1:2016-12 i jej krajowego uzupełnienia PN-B-06265:2018-10 / Maciej Gruszczyński, Urszula Paszek // Ochrona przed Korozją 2020, T. 63, Nr 1, s. 12-17. – doi: 10.15199/40.2020.1.3. – ISSN 0473-7733 Lista MNiSW: tak Punktacja MNiSW: 20
2019
1. Forms of damage of bricks subjected to cyclic freezing and thawing in actual conditions / Teresa Stryszewska, Stanisław Kańka // Materials [online]. – 2019, Vol. 12, Iss. 7, s. [1-16]. – doi: 10.3390/ma12071165. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
2. Effect of cement type on the mechanical behavior and permeability of concrete subjected to high temperatures / Izabela Hager, Tomasz Tracz, Marta Choińska, Katarzyna Mróz // Materials [online]. – 2019, Vol. 12, Iss. 18, Spec. Iss., s. [1- 14]. – doi: 10.3390/ma12183021. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
3. Effect of hydration and carbonation progress on the porosity and permeability of cement pastes / Tomasz Tracz, Tomasz Zdeb // Materials [online]. – 2019, Vol. 12, Iss. 1, s. [1-20]. – doi: 10.3390/ma12010192. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
4. Role of polypropylene fibres in concrete spalling risk mitigation in fire and test methods of fibres effectiveness evaluation / Izabela Hager, Katarzyna Mróz // Materials [online]. – 2019, Vol. 12, Iss. 23, s. [1-20]. – doi: 10.3390/ma12233869. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
5. Liquid penetration depth and strength of concretes modified with polymer admixtures under the action of crude-oil products / Maciej Gruszczyński, Małgorzata Lenart // Materials [online]. – 2019, Vol. 12, Iss. 23, s. 1-11. – doi: 10.3390/ma12233900. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
6. Effect of vacuum mixing and curing conditions on mechanical properties and porosity of reactive powder concretes / Tomasz Zdeb // Construction and Building Materials [online]. – 2019, Vol. 209, s. 326-339. – doi: 10.1016/j.conbuildmat.2019.03.116. – ISSN 0950-0618 Lista MNiSW: tak Punktacja MNiSW: 140
7. Application of digital image correlation (DIC) method for road material testing / Jarosław Górszczyk, Konrad Malicki, Teresa Zych // Materials [online]. – 2019, Vol. 12, Iss. 15, s. [1-19]. – doi: 10.3390/ma12152349. – ISSN 1996-1944 Lista MNiSW: tak Punktacja MNiSW: 140
8. Two limiting lines technique to obtain minimum paste demand of self-consolidating concrete / Maciej Urban // ACI Materials Journal [online]. – 2019, Vol. 116, No. 6, s. 131-138. – doi: 10.14359/51716984. – ISSN 1944-737X Lista MNiSW: tak Punktacja MNiSW: 70
9. Wpływ rodzaju kruszywa lekkiego na właściwości drobnokruszywowych betonów izolacyjno-konstrukcyjnych / Lucyna Domagała // Cement Wapno Beton. – 2019, R. 22/84, Nr 4, s. 296-306. – ISSN 1425-8129 Lista MNiSW: tak Punktacja MNiSW: 40
10. Wpływ składu betonów zwykłych i wysokwartościowych na ich wilgotność w umownym stanie powietrzno-suchym / Jacek Śliwiński // Cement Wapno Beton. – 2019, R. 24/86, Nr 6, s. 448-454. – ISSN 1425-8129 Lista MNiSW: tak Punktacja MNiSW: 40
11. The structure of porosity of the cement mortar containing nano-TiO2 after exposure to the sulphuric acid / Elżbieta Stanaszek-Tomal // Ochrona przed Korozją 2019, R. 62, Nr 4, s. 135-139. – doi: 10.15199/40.2019.4.2. – ISSN 0473-7733 Lista MNiSW: tak Punktacja MNiSW: 20
2018
1. Durability of steel reinforced polyurethane-to-substrate bond / Stefano De Santis, Teresa Stryszewska, Simone Bandini, Gianmarco de Felice, Łukasz Hojdys, Piotr Krajewski, Arkadiusz Kwiecień, Francesca Roscini, Bogusław Zając // Composites. Part B, Engineering [online]. – 2018, Vol. 153, s. 194-204. – doi: 10.1016/j.compositesb.2018.07.043. – ISSN 1879-1069 Lista MNiSW: A Punktacja MNiSW: 45
2. External treatments for the preventive repair of existing constructions: a review / M. Sánchez, A. Kwiecień, T. Stryszewska, B. Zając // Construction and Building Materials [online]. – 2018, Vol. 193, s. 435-452. – doi: 10.1016/j.conbuildmat.2018.10.173. – ISSN 0950-0618 Lista MNiSW: A Punktacja MNiSW: 40
3. Ocena możliwości stosowania reguły mieszanin do oszacowania przepuszczalności azotu betonu wysokowartościowego / Tomasz Tracz // Cement Wapno Beton. – 2018, R. 21/83, Nr 4, s. 308-316. – ISSN 1425-8129 Lista MNiSW: A Punktacja MNiSW: 20
4. Autogenous healing effect of ultra-high performance cementitious composites / Tomasz Zdeb // Journal of Advanced Concrete Technology [online]. – 2018, Vol. 16, Iss. 11, s. 549-562. – doi: 10.3151/jact.16.549. – ISSN 1347-3913 Lista MNiSW: A Punktacja MNiSW: 25
2017
1. An analysis of the steam curing and autoclaving process parameters for reactive powder concretes / Tomasz Zdeb // Construction and Building Materials [online]. – 2017, Vol. 131, s. 758-766. – doi: 10.1016/j.conbuildmat.2016.11.026. – ISSN 0950-0618 Lista MNiSW: A Punktacja MNiSW: 40
2. Untargeted metabolomics approach in halophiles: understanding the biodeterioration process of building materials / Justyna Adamiak, Vincent Bonifay, Anna Otlewska, Jan A. Sunner, Iwona B. Beech, Teresa Stryszewska, Stanisław Kańka, Joanna Oracz, Dorota Żyżelewicz, Beata Gutarowska // Frontiers in Microbiology [online]. – 2017, Vol. 8, s. [1- 12]. – doi: 10.3389/fmicb.2017.02448. – ISSN 1664-302X Lista MNiSW: A Punktacja MNiSW: 35
3. Incorrect air void parameters in fly ash concretes / Aneta Nowak-Michta // ACI Materials Journal. – 2017, V. 114, No. 3, s. 365-374. – doi: 10.14359/51689675. – ISSN 0889-325X Lista MNiSW: A Punktacja MNiSW: 30
4. Factors determining the biodiversity of halophilic microorganisms on historic masonry buildings / Anna Otlewska, Justyna Adamiak, Teresa Stryszewska, Stanisław Kańka, Beata Gutarowska // Microbes and Environments [online]. – 2017, Vol. 32, No. 2, s. 164-173. – doi: 10.1264/jsme2.ME16159. – ISSN 1347-4405 Lista MNiSW: A Punktacja MNiSW: 25
5. Właściwości betonu nawierzchni odcinka autostrady niemieckiej zbudowanej w roku 1935 w okolicach Gliwic / Wiesław Kurdowski, Tomasz Tracz, Jacek Śliwiński // Cement Wapno Beton. – 2017, R. 21/83, Nr 6, s. 517-527. – ISSN 1425- 8129 Lista MNiSW: A Punktacja MNiSW: 20
6. Przyczyny i mechanizm powstawania odprysków betonu pod wpływem wysokiej temperatury wywołanej pożarem / Katarzyna Mróz, Izabela Hager // Cement Wapno Beton. – 2017, R. 22/84, Nr 6, s. 445-456. – ISSN 1425-8129 Lista MNiSW: A Punktacja MNiSW: 20
7. Wpływ uziarnienia i zawartości superabsorbującego polimeru (SAP) na podstawowe właściwości i porowatość zaczynu cementowego / Jacek Śliwiński, Tomasz Zachariasz // Cement Wapno Beton. – 2017, R. 22/84, Nr 4, s. 289-298. – ISSN 1425-8129 Lista MNiSW: A Punktacja MNiSW: 20
8. Właściwości betonu nawierzchni odcinka autostrady niemieckiej zbudowanej w roku 1935 w okolicach Gliwic / Wiesław Kurdowski, Tomasz Tracz, Jacek Śliwiński // Cement Wapno Beton. – 2017, R. 21/83, Nr 6, s. 517-527. – ISSN 1425- 8129 Lista MNiSW: A Punktacja MNiSW: 20
2016
1. The change in selected properties of ceramic materials obtained from ceramic brick treated by the sulphate and chloride ions / Teresa Stryszewska // Construction and Building Materials [online]. – 2014, Vol. 66, s. 268-274. – doi: 10.1016/j.conbuildmat.2014.05.066. – ISSN 0950-0618 Lista MNiSW: A Punktacja MNiSW: 40
2. Incorrect air void parameters in fly ash concretes / Aneta Nowak-Michta // ACI Materials Journal. – 2017, V. 114, No. 3, s. 365-374. – doi: 10.14359/51689675. – ISSN 0889-325X Lista MNiSW: A Punktacja MNiSW: 30
3. Experimental research of masonry compressive strength in the Auschwitz II – Birkenau former death camp buildings / Piotr Matysek, Teresa Stryszewska, Stanisław Kańka // Engineering Failure Analysis [online]. – 2016, Vol. 68, s. 263- 274. – doi: 10.1016/j.engfailanal.2016.06.007. – ISSN 1873-1961 Lista MNiSW: A Punktacja MNiSW: 30
4. The influence of aggregate type on the physical and mechanical properties of high-performance concrete subjected to high temperature / Izabela Hager, Tomasz Tracz, Jacek Śliwiński, Katarzyna Krzemień // Fire and Materials [online]. – 2016, Vol. 40, Iss. 5, s. 668-682. – doi: 10.1002/fam.2318. – ISSN 0308-0501 Lista MNiSW: A Punktacja MNiSW: 25
5. The influence of water saturation on mechanical properties of ceramic bricks – tests on 19th- century and contemporary bricks / P. Matysek, T. Stryszewska, S. Kańka, M. Witkowski // Materiales de Construcción [online]. – 2016, Vol. 66, Iss. 323, s. [1-8]. – doi: 10.3989/mc.2016.07315. – ISSN 1988-3226 Lista MNiSW: A Punktacja MNiSW: 25
6. Open porosity of cement pastes and their gas permeability / T. Tracz // Bulletin of the Polish Academy of Sciences. Technical Sciences [online]. – 2016, Vol. 64, Iss. 4, s. 775-783. – doi: 10.1515/bpasts-2016-0086. – ISSN 2300-1917 Lista MNiSW: A Punktacja MNiSW: 20
7. Nawierzchnia betonowa autostrady po 70 latach eksploatacji, próba wyjaśnienia niezwykłej trwałości/ Wiesław Kurdowski, Adam Witek, Jacek Śliwiński // Cement Wapno Beton. – 2016, R. 21/83, Nr 1, s. 27-35. – ISSN 1425-8129 Lista MNiSW: A Punktacja MNiSW: 15